 Products |
| Found 5 Records |
|
Page 1 of 1:
|
|
|
1
|
|
|
|
OIL FILTER WRENCH, K1200GT, 2005 or EARLIER
This custom made oil filter wrench for your BMW factory oil filters on both early model “K” bikes and “Oil Head R Bikes” is CNC machined from 6061 aluminum then blue anodized. Easily remove and install oil filters on the K1, K100, K100RS, K100RT/LT, K1100LT, K1100RS, K1200GT, K1200LT, K1200RS, K75/C, K75RT, K75S, R1100/850R, R1100GS, R1100RS, R1100RT, R1100S, R1150GS/Adv, R1150R, R1150RS, R1150RT, R1200C, R1200CL. Can be used with either an 3/8" ratchet or 17mm wrench.
Part No:
10-700
K 1200 GT > OIL FILTER WRENCH > BLUE ANODIZE |
|
|
OIL FILTER WRENCH, K1200GT, 2006 or LATER
This custom made oil filter wrench for your BMW motorcycle is CNC machined from 6061 aluminum then black anodized. Easily remove and install oil filters on the R1200GS, R1200R, R1200RT, R1200RT-P, R1200ST, K1200S, K1200R, F650, F650CS, F650GS, F800GS, F800S, F800ST, K1200S (‘06 OR LATER) or K1200GT (‘06 OR LATER). Can be used with either an 3/8" ratchet or 17mm wrench. ...More Info
Part No:
10-500
K 1200 GT > OIL FILTER WRENCH > BLACK ANODIZE |
|
|
SHIFT EXTENSION, K1200GT
This BMW motorcycle shift extension increases the length of the shift lever by more than 3/4". The shift extension is CNC machined from 6061 aluminum then clear anodized. To install the shift extension you simply push the shift extension over the shift lever. The shift extension has barbs machined on the inside to securely hold it in place. ...More Info
Part No:
10-300
K 1200 GT > SHIFT EXTENSION > CLEAR ANODIZE |
|
|
SIDESTAND FOOT, K1200GT, 2005-2009
This BMW motorcycle side stand foot increases the area of the pad to 2 1/4" x 3" to help prevent tip overs. The 3" long toe loop makes it easier to access the side stand in both the upright and down position. Made of 6061 aluminum and steel. Black powder coat. Screws are stainless steel. Easy installation, simple bolt-on. No drilling or modifications required. ...More Info
Part No:
17-200
K 1200 GT > SIDESTAND FOOT > POWDER COAT |
|
|
SPORTBOARD, DRIVER / SIDE STAND FOOT COMBO, K1200GT
BMW motorcycle floorboards are floorboards designed specifically for BMW motorcycles K 1200 GT. These footboards offer increased leg room and comfort. The driver floor boards relocate your foot position 1 ¾" lower than stock allowing increased leg room and comfort. The floor boards measure 9"x 4", offering comfort, support and a variety of foot positions as you ride. The installation of these custom after market BMW motorcycle parts is a simple bolt on procedure. This BMW motorcycle side stand foot increases the area of the pad to 2 1/4" x 3" to help prevent tip overs. The 3" long toe loop mak ...More Info
Part No:
17-500
K 1200 GT > SPORTBOARD, DRIVER > POWDER COAT |
|
|
|
| Found 5 Records |
|
Page 1 of 1:
|
|
|
1
|
|
|
 |
|
